Product ID:NYLON 6/10, 139
MSDS Date:10/01/1991
FSC:9330
NIIN:00N044054
MSDS Number: BSBWQ

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MUG0

Telephone: 716-265-0413

Cage: 0MUG0

POLY(HEXAMETHYLENE SEBACAMIDE)

CAS: 9011-52-3

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS PHYSIOLOGICALLY INNOCUOUS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES, IF IRRITATION DEVELOPS, SEEK MEDICAL
ASSISTANCE. INHAL: REMOVE FROM EXPOSURE. IF BREATHING STOPS, BEGIN
MOUTH TO MOUTH. EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN:
WASH AFFECTED AR EA WITH SOAP AND WATER. REMOVE DIRTY CLOTHING.
INGEST: GET MD IMMEDIATELY .

Flash Point:752F,400C
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:PRODUCT IS CONSIDERED NORMAL SOLID WASTE.
SWEEP UP SPILL AND PLACE IN SUITABLE CONTAINER FOR DISPOSAL OR
REUSE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A DRY PLACE. KEEP CONTAINERS
CLOSED TO PREVENT CONTAMINATION. OPEN ONLY IN WELL-VENTILATED AREA.
Other Precautions:THIS MATERIAL IS INTENDED FOR LABORATORY USE ONLY. IT
IS NOT SOLD OR INTENDED FOR DRUG, HOUSEHOLD OR OTHER USE.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED +SAFETY GOGGLES
Other Protective Equipment:EYEBATH AND/OR SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Spec Gravity:1.05-1.15
Solubility in Water:INSOLUBLE
Appearance and Odor:TRANSLUCENT PELLET, NO NOTICEABLE ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS AND BASES.
Stability Condition to Avoid:EXTREME HEAT.
Hazardous Decomposition Products:HCN, CO, NH3 WHEN EXPOSED TO EXTREME
HEAT.

Waste Disposal Methods:IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS. DO NOT DISCHARGE INTO WATERWAYS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.